Imperial Architecture

From Simplicitypvp
Revision as of 06:50, 27 October 2015 by Allsixsix (talk | contribs)
Jump to navigation Jump to search

Imperial Architecture is a distinct and unique method of building design utilized by The Empire. The style continued to be learned, used, and improved upon for years after the fall of The Empire in Stonetown, Ascaris, Aggersel, Virunum, and new towns created by The Order and The Principate.


Classic Imperial Architecture was created by Pippenger in 2013 to be used in New Caladan and other imperial cities. It was a relatively simple style meant to have an elegant and civilized, though easily mass produced, appearance.


Post-Imperial Architecture describes variants used by Pippenger after the fall of The Empire, as well as all improvements made by players who modified the style for themselves. In some cases the Post-Imperial style was considerably more complex than, and superior to, Classic Imperial Architecture. Post-Imperial Architecture reached its peak in Ascaris, where Cinnabars greatly improved the style.


Materials

Rules regarding building materials in The Empire were strict and specific. Stonebrick was the primary material of almost all buildings, with smooth stone slabs and spruce being used for roofs and floors. Cobblestone and most other materials were usually prohibited, and even the use of glass was discouraged.


EA 1B.png


While these rules were most strict in Classic Imperial Architecture, Post-Imperial Architecture has generally held to them as well.

Windows

Most imperial buildings had open-air windows, usually built in specific ways. Most common were 1x3 pillar windows in a Romanesque style.


EA 3B.png EA Pillars2.png


These pillars could be slightly taller or shorter, and occasionally wider.


Taller arched windows were often used as well. These were wider than the pillar windows, usually 2-3 meters, and 4-7 meters in height. At the upper corners were upside down stone brick stairs, giving the windows a natural arch shape.


EA 2B.png EA Arches1.png

Variant windows with pillars and arches of differing sizes were used less commonly. Occasionally circular windows were created by putting stair blocks against each corner of a square gap in a wall.

EA RoundWindows1.png


Sometimes, particularly in buildings where defense was an important consideration, slit windows were created with stone brick slabs.

Reliefs

One of the most distinctive features of Classic Imperial Architecture is the method of adding stone brick relief decorations to walls.

These reliefs were most often sandwiched between a row of upside down stair blocks beneath them, and typical stair blocks above them. In this way, imperial buildings were often divided into vertical segments, each segment decorated with different styles of relief or window.


The most common style of relief was a 3x3 square with a single block jutting out from the center bothom and center top.

EA Reliefs2.png

Another common style was shaped like a simplified S or Z.

EA Reliefs1.png

Other styles of relief were sometimes used as well.

EA Reliefs3.png

Exterior Columns

Not especially common in The Empire, but very common in Post-Imperial Architecture at the later bases Ascaris and Aggersel, were buildings with columns/pillars laid directly against the exterior walls.

These columns usually met in an arch shape at the tops, like the common arch windows. Buildings could be covered in multiple layers of exterior columns.

EA Columns1.png

At Ascaris particularly, a style of column was used that leaned outward from the building. These columns had an upside down stair placed against the top block, and usually more stone brick walls were laid on top of these stairs. This allowed houses to get wider as they increased in height. Cinnabars was the inventor and chief expert of this style.

EA Columns2.png EA Columns4.png

Sometimes flower bushes and grass were also placed on top of these stairs.

EA Columns3.png EA Columns5.png

Roofs

Classic Imperial roofs were almost universally made of spruce planks, stairs, and slabs. In Classic Imperial style, these roofs matched the shape of the building they covered, and formed a simple pyramid shape as the walls met at a peak.

EA Roof1.png

Some Imperial roofs were similar, but rather than a peak on top, they had a large flat area, in a truncated pyramid or "3d trapezoid" shape.

EA Roof2.png

Many roofs followed this basic pattern but had additional detail, particularly Cinnabarian roofs in Ascaris.

EA Roof3.png


The highest quality Imperial and Post-Imperial roofs, though, were usually in a triangular prism shape, like a typical "log cabin" roof.

EA Roof4.png EA Roof5.png

Large circular buildings usually had a sphere-based dome roof made of smooth stone slabs. These were built according to the plotz voxel sphere generator. Spruce domes were also used. Domes are an integral part of both Classic and Post-Imperial Architecture.

EA Dome2.png EA Dome1.png

Whatever the style of roof used, almost all examples of Imperial Architecture include a lip of upside down stone brick stairs on the building exterior directly beneath the roof.